Everything I wish someone had told me before buying my first turntable, from what a preamp actually does to why some records skip, in plain words and things to play with.
Vinyl 101 for Dummies
TL;DR
- Avoid suitcase and all-in-one players. Theyโre cheap for a reason.
- Something in your setup needs a phono preamp. Most beginner turntables have one built in.
- Budget for speakers too. They shape the sound as much as the turntable does.
- If you can stretch, get a turntable with an adjustable tonearm. Itโs the difference between a record that skips and a record you can fix.
Just want an answer? Skip to the turntable finder at the end.
A friend of mine, Akmal, recently asked me which turntable he should buy. He recently bought his first vinyl at The Weekndโs concert and has been thinking about buying a turntable for some time.
My initial thought was to record a video of myself explaining the things he should consider before making a purchase. But I quickly realised how much effort that would take.
So, I figured I might as well put Claude to work, combining it with my passion for and experience with owning a turntable and collecting vinyl records, to create an interactive guide instead. Itโs something Iโve always wanted to do, but never quite found the motivation to โ until now.
First, Why Vinyl?
Letโs get this out of the way: vinyl is not technically better than streaming. A decent streaming service is cleaner, quieter and has every song ever made. Records crackle, warp, collect dust and cost RM100+ each. Honestly, if you ask me, you shouldnโt buy vinyls purely for audiophilic reasons.
And yet, people keep buying records and the demand keeps growing. Thereโs something about the whole experience that streaming simply doesnโt replicate. Here are a few reasons Iโve come to appreciate. See which ones resonate with you:
Notice that only one card is about the sound itself, and even that one comes with an asterisk. SoundStage! makes the case for vinyl while admitting digital measures better, Lee Clarion compares it to having a concert at home, and Sophia Omarji puts it down to slowing down and paying attention. If none of the cards landed, a good pair of headphones will get you further for the money.
How a Record Makes Sound
The music is carved into the vinyl as one long groove that spirals from the edge to the middle, and its wiggling walls are the sound wave. A diamond tip called the stylus rides the groove, and the cartridge itโs attached to turns those wiggles into a tiny electrical signal. Turn the music up, pan it left and right, and press โHear itโ:
A loud passage ยท Both walls move together, so itโs centred between the speakers
Stylus or needle?
Same thing. Stylus is the proper name, but most people just call it the needle, a leftover from gramophones, which did actually play with steel needles.
Records come in three sizes: 12-inch for albums and some singles, 7-inch for singles, and the rarer 10-inch for EPs, special editions and old shellac records. Most albums (LPs) play at 33โ RPM. 7-inch singles, along with some 12-inch singles and audiophile reissues, play at 45. The label will explicitly tell you which. Very old shellac records, however, use 78, and only some turntables can play them at that speed.
Many 7-inch singles also have a big centre hole that wonโt sit on a normal spindle. A small plastic 45 adapter fixes that, and lots of turntables come with one (often tucked into a slot on the deck itself), so check before you buy one.
Anatomy of a Turntable
Regardless of price, most turntables share the same basic components. The differences lie in how theyโre designed and how much control you have over them. Letโs take a closer look at what each part does, and what changes when you switch the tonearm to Fixed:
Stopped ยท Press play, then cue the arm
Those three disappearing parts (the counterweight, the anti-skate dial and a removable headshell) are what cheaper turntables leave out, and it matters more than youโd think. More on that further down.
Understanding the Phono Preamp
Remember that tiny electrical signal from the cartridge? Itโs called a phono signal, and itโs really tiny: a few thousandths of a volt, roughly a hundred times weaker than the line-level signal that speakers, amplifiers and laptops expect1.
So a phono preamp boosts it to line level, an amplifier boosts that enough to push speaker cones, and the speakers make the sound. Every setup does those three jobs; the only question is which box does which. Most beginner turntables have the preamp built in, with a PHONO / LINE switch on the back. Try wiring one up, and break it on purpose:
Sounds right ยท The simplest setup there is, and most peopleโs first
The rule to remember: exactly one phono preamp in the chain. โPoweredโ speakers have an amp inside; โpassiveโ ones need an amp in front of them. And if your turntable has a thin ground wire, screw it to your preamp or amp. Thatโs what kills the hum.
What to Look for in a Turntable
Hear one before you buy one
Before spending anything, go and listen to records in person. Vinyl cafรฉs let you pick a record, put it on and sit with it, which tells you more about whether vinyl is for you (and what good playback sounds like) than any spec sheet.
Try Eternyl Vinyl Cafรฉ in Sea Park, PJ or SS18, Subang Jaya, Listen HiFi Cafรฉ in Chow Kit, or V88 at The Starhill. And if a shop has turntables on display, ask to try one, so you can feel how the arm and cueing lever handle before you commit.
Types of Turntables
Rather than chase specific models (they change every year), it helps to think in tiers. Prices are rough, from Malaysian retailersโ listings at the time of writing, and they move around a lot with sales and bundles.
| Kind | What you get | What you give up | Examples | Rough price |
|---|---|---|---|---|
| Suitcase / all-in-one | Speakers built in, very cheap, cute | Crude cartridges that can wear records, poor sound, nothing to upgrade | Most โretroโ briefcase players | Under RM400 |
| Plug-and-play | Automatic, built-in preamp, often Bluetooth, replaceable stylus | Fixed tonearm, no tracking force or anti-skate adjustment, cartridge canโt be upgraded | AT-LP60XBT (about RM680), AT-LP70XBT (about RM800โ1,200), Sony PS-LX310BT | RM600โ1,200 |
| Adjustable arm | Counterweight, anti-skate, a cartridge you can swap, usually a switchable preamp | A one-time setup, and a bit more money | AT-LP3XBT (about RM1,300โ1,550), AT-LP5X (about RM1,650), AT-LP120X, Pro-Ject Debut Carbon EVO, Fluance RT81 | RM1,300 and up |
| Enthusiast | Better arms, motors and cartridges | Money, and the rabbit hole | Rega, Technics, higher-end Pro-Ject | RM3,000 and up |
If youโre stuck between two, the turntable finder at the end will pick one for you.
Belt Drive vs. Direct Drive
A belt drive turns the platter with a rubber belt from a motor off to the side; a direct drive has the motor right under the platter. The differences are easier to appreciate side by side, especially when you change a few things:
Both stopped ยท Press play and watch the readouts
For listening at home, either is fine. Belt drives tend to be cheaper, and a new belt is a cheap fix. Direct drives start instantly and hold speed under pressure, which is why DJs use them.
Automatic vs. Manual
- Fully automatic: press start, and the turntable lowers the arm onto the record by itself, then lifts it and returns it when the side ends. Great if youโre nervous about handling the arm, or tend to doze off on the sofa.
- Manual: you move the arm over the record and lower it with the cueing lever, then put it back when the side ends. It sounds scary but takes about two tries to get used to.
Dropping the needle by hand goes like this:
- Start the platter at the right speed.
- Lift the cueing lever, so the arm rises off its rest.
- Swing the arm over where you want to start. For the first track, thatโs the lead-in, the smooth band just inside the rim. For any other track, aim for the thin, shinier ring just before it: thatโs the silent gap between songs. Count the gaps from the edge, in the order the sleeve lists the tracks.
- Lower the lever, and the arm floats down gently on its own.
- At the end of the side, lift the lever, put the arm back on its rest, and stop the platter (or flip the record).
Notice that the arm doesnโt move in a straight line: it swings in an arc around its pivot, so the stylus curves in from the edge. Pick a track and watch where it lands:
Lead-in ยท Drop it here and it finds track 1 on its own
Pick a track, or drag the stylus (or tap the record) to put it anywhere. The tracks run from the edge inwards, in the order the sleeve lists them, and each gap between them shows up as a thinner, shinier ring: thatโs where to aim.
Why does it find track 1 by itself, and loop at the end?
Because the record is cut that way. The lead-in is a short, silent spiral with its grooves spaced wide apart, so wherever you drop the stylus on it, the spinning record quickly draws it in to the start of track 1. The gaps between tracks work the same way, just shorter.
After the last song, the groove spirals quickly through the run-out into a locked groove: a closed circle rather than a spiral, so the stylus goes round and round instead of running into the label. That soft, endless thumpโฆ thump is your cue to lift the arm. An automatic turntable senses it and lifts the arm for you.
The catch is that the auto-return mechanism has to push the arm around, so automatic turntables usually have simpler, fixed tonearms with fewer adjustments. Keep that in mind; it comes back in the tonearm section, the most important one in this guide.
Misconception: only manual turntables have an adjustable arm
Usually, not always. Automatic decks lean towards fixed arms because it keeps the mechanism simple and cheap, but some put an adjustable counterweight and anti-skate on an automatic deck. Audio-Technicaโs AT-LP3XBT, for one, is fully automatic and adjustable.
It works the other way too: going manual doesnโt guarantee an adjustable arm, as some cheap manual decks have fixed ones. So donโt judge by โautomaticโ or โmanualโ on the box. Look for a counterweight at the back of the arm and an anti-skate dial beside it.
The Cartridge and Stylus
The stylus is the bit that physically rides the groove, while the cartridge turns its movement into an electrical signal. Together, theyโre among the components that have the biggest influence on how your records sound. Tap around, pull the stylus off, and look inside:
Hereโs what you should know before buying one:
- Moving magnet (MM) vs moving coil (MC). Two ways of building a cartridge. MM is cheaper, louder and what almost every beginner turntable uses. MC is pricier and needs a preamp that supports it. Stick with MM until you have a reason not to.
- The stylus wears out. Audio-Technica rates the basic conical stylus on its entry-level turntables at around 300 to 500 hours of play2. A worn stylus can sound dull and fuzzy, and eventually damage records. Check that a replacement stylus is easy to buy.
- Can it be upgraded? On cheaper turntables the cartridge is built into the arm, so you can only ever replace the stylus. Better turntables have a standard mount or a removable headshell, so you can swap in a better cartridge later.
The stylus shape matters too. Audio-Technica groups styli into five shapes3, from cheap and forgiving to sharp and detailed. The finer the tip, the more of the groove it reads, and the more it asks of your setup. Pick one and watch how much of a tight wiggle it can actually follow:
Elliptical ยท The sweet spot
Narrower side to side, so it reaches further into the wiggles. The sweet spot for most people.
Detail
How much of the groove's fine detail it can read3 of 5Forgiving
How well it copes with a rough setup or worn records4 of 5Price
Roughly what a replacement costsCheapRated life
How long it lasts before it wears outAbout 300 hoursSo which shape is best?
On paper, the line-contact family (Shibata, line contact and MicroLine): it reads the most detail and, because it spreads the wear over a longer edge, lasts the longest. In practice, elliptical is the sweet spot for most people. Conical is the sensible pick for a fixed-arm turntable, or a crate of beaten-up used records.
So when will yours need replacing? Tell it how much you listen:
Replace in 23 months ยท 500 hours at 5 a week
The Tonearm
This is the trade-off nobody mentions in the product photos.
The stylus has to press into the groove with just the right weight, the tracking force, measured in grams. Every cartridge comes with a range from its maker; Audio-Technicaโs AT-VM95E, for example, wants 1.8 to 2.2 grams4. Too light and it skips; too heavy and it wears things out.
As a record spins, the arm also gets pulled towards the middle, so an anti-skate dial pushes back. The usual starting point is to set it to the same number as the tracking force.
On an adjustable tonearm, you set both. On a fixed tonearm, the factory sets them, which is fine until one record (a slightly warped one, a heavy pressing, a thunderous bass line) needs a little more. Then there is nothing you can do.
Whatโs a heavy pressing?
A record pressed from more vinyl: 180g instead of the usual 120โ140g. Not a worse record, but it sits a touch higher on the platter and is often cut louder, so a fixed arm set up for thinner records can struggle with it. An adjustable arm just needs a little more tracking force.
Try the warped record on both arms:
Tracking nicely ยท Inside the cartridgeโs range
Shaded: the cartridgeโs range ยท amber tick: what this record needs ยท dot: your setting
Anecdote
My first turntable was an Audio-Technica AT-LP70XBT, fitted with a decent AT-VM95C cartridge. It worked perfectly well with most of my records and is a popular choice among beginners.
However, a handful of records would skip at exactly the same spots, every time I played them. They all happened to be thick, 180g pressings. With no adjustable counterweight or anti-skate dial, there wasnโt much I could do beyond cleaning the records and attempting some DIY levelling by placing a coin on top of the cartridge.
Eventually, I picked up an Audio-Technica AT-LP5X at a discount. I set the tracking force to the cartridge manufacturerโs recommended 2.0 grams, matched the anti-skate, and havenโt experienced a single skip since.
Now, this isnโt to say fixed-arm turntables are inherently bad. Theyโre designed for people who value convenience: the ability to press a button and listen, without having to worry about adjusting tracking force or anti-skate. For most people, thatโs perfectly fine. But as a perfectionist, I eventually realised that I wasnโt quite that person.
Upgrade the Stylus or the Turntable?
If your turntableโs arm is adjustable and it plays your records without trouble, upgrade the stylus (or cartridge) first. Itโs the part that touches the music, so itโs the cheapest big jump in sound. Some cartridge bodies take a whole family of styli: Audio-Technicaโs VM95 range, for example, lets you swap a conical stylus for an elliptical, Shibata or MicroLine one without touching the rest5.
Upgrade the turntable when the turntable itself is the limit: a fixed arm that canโt track some of your records (my story above), a speed that wobbles, or a built-in cartridge with nowhere to go. On a plug-and-play deck the stylus is usually the only upgrade (an elliptical ATN3600LE for the AT-LP60X series, say), so past that, the next step up is a new turntable.
Buying a Used Turntable
You donโt necessarily have to buy new to get a decent turntable. The second-hand market has plenty of solid older decks from Technics, Pioneer, Pro-Ject and Rega, often at a much friendlier price. Just make sure you know what youโre looking at before handing over your money. A few things Iโd check:
- Test it with a record you know, ideally your own. Listen for wobbly pitch, hum and crackle in one channel only.
- Check the stylus and cartridge. A bent or missing stylus is a cheap fix if you can still buy a replacement for that cartridge.
- Feel the plinth. Heavier usually means better built.
- Check the dust cover and hinges. Theyโre surprisingly hard to replace.
- Ask about the belt on a belt drive. An old belt is cheap to replace, but budget for it.
Setup Checklist
Most of these take a few minutes and only need doing once. Keep this open while you unbox, and tick them off as you go (your ticks stay in this browser):
0 of 7 done ยท Tick them off as you go
Step 6 is the fiddly one, and the one that matters most on an adjustable arm. Have a practice run here first. Balance the arm, zero the ring, then dial in 2 grams:
Back-heavy: the stylus end rises ยท Turn the weight forwards, towards the pivot, until the arm floats level
- Arm floats level (to do)
- Ring turned to 0 (to do)
- Ring set to 2.0 g (to do)
- Anti-skate matched (to do)
Notice what happens if you zero the ring before the arm floats level: every number after that is off. Thatโs the most common setup mistake, and why a cheap stylus force gauge is worth having to double-check.
Keep the speakers off the turntableโs table
Speakers shake whatever they sit on, and a stylus is built to pick up tiny movements. Put them on the same table as the turntable and it reads their vibration too: muddy, boomy bass, skips on loud passages, and at high volume a low howl as the sound feeds back on itself. It also damages the record over time.
Speaker stands fix it, like the pair either side of my shelf in the photo below. If stands arenโt an option, use separate furniture, or at least foam isolation pads under the speakers.

My setup: the LP5X, a pair of Edifier R1855DBs, and the records living in the shelf underneath.
That white cube shelf is IKEAโs KALLAX, which is the classic home for a record collection: each cube fits 12-inch records almost exactly, and itโs sturdy enough to put the turntable on top. And as a bonus, if you can get one, a sound visualiser like PETRUโs turns whateverโs playing into a little light show beside the turntable (thatโs the glowing display on the right).
Sounds Wrong?
Something will, at some point. Almost every problem comes down to a handful of causes, and most cost nothing to fix. Pick what youโre hearing:
Usually the ground wire ยท A steady low hum thatโs there even between songs
- Screw the turntableโs thin ground wire to the preamp or amp. Thatโs the fix nine times out of ten.
- Move power bricks, routers and phone chargers away from the turntable and its cables.
- Check the phono signal isnโt going into a LINE / AUX input: that hums and sounds quiet. See the preamp section.
Which Records Should You Buy?
Once the turntableโs sorted, the records are where the money really goes (if youโre curious, my own collection lives on this site). New and used records both have their place in a collection, and neither is automatically the better option:
| New | Used | |
|---|---|---|
| Price | RM100 or more for most new LPs | Often less than half the price of new |
| Condition | Sealed and unplayed, though new isnโt always perfect: pressings can arrive warped, off-centre or noisy | Anything from near-new to unplayable, so it depends on the sellerโs grading |
| What youโll find | Current releases and reissues | Out-of-print records, original pressings, and the joy of crate digging |
| Who gets paid | The artist and label | The seller |
A few habits make both safer:
- Check a new record as soon as it arrives. Look at it edge-on for warps and play both sides. Shops will usually swap a faulty pressing, but only if you tell them quickly.
- Inspect a used record under a light. Tilt it so the light runs across the grooves. Shiny surface scuffs are often harmless; a scratch you can feel with a fingernail will usually be heard.
- Check the label and smell the sleeve. Writing and stickers knock the price down, and a musty smell can mean mould.
- Buy from sellers who grade honestly and take returns. The Discogs marketplace, record stores, fairs and Carousell all work; just ask questions before you pay.
Where to Buy Records?
My go-to places, new and used, from proper record stores to people clearing out their shelves. Filter by how youโd like to shop, and check their pages before you go, since hours and addresses change.
Tip
Buying in store is generally more expensive than online. VinylVox especially, even though its collection is far more varied. So whenever you spot something you like, compare prices online first.
The weekend flea market, with crates of records to dig through. Go early.
People selling their collections, often for less than any shop.
Collectors posting the records theyโre letting go of.
New records alongside the instruments, with a cafรฉ in-house.
A small, well-curated room of records.
Tucked inside a wet market, and the place for Malaysian and Asian music from the past.
A family-run shop that hosts gigs too.
Used classical and jazz in great condition, plus new imports.
Records from the โ60s onwards, online and in a shop.
An online record store that also sells on Carousell.
An online store leaning indie, rock and electronic.
A big catalogue and regular sales.
One of the biggest, most varied collections around, but pricier in store: compare online first.
Japanese city pop and limited Japanese pressings.
Sells through Instagram and Carousell.
The Grading System
Used records are graded on a shared scale, the Goldmine Standard, which Discogs uses too6. A listing grades the record and the sleeve separately, so a scruffy cover can still hold a clean disc. Flip through the grades, and listen to what each one does to the music:
Very Good Plus (VG+) ยท The sweet spot for listening
Looks
Signs of play and careful handling: light scuffs or very light scratches.Sounds
Defects are cosmetic and donโt affect playback.Sleeve
Slight wear, a turned-up corner or a slight seam split.Worth
Generally about 50% of Near Mint.For listening, VG+ is the sweet spot: it costs about half of Near Mint and sounds just as good. VG is fine for something cheap or rare, as long as you expect a little crackle. Below that, only buy it if you canโt find it any other way. And remember a grade is the sellerโs opinion: ask whether theyโve actually played it (play-graded) or just looked at it.
Myths Worth Ignoring
- โ180g sounds better.โ Weight makes a record sturdier and less prone to warping, but it doesnโt change the sound. The mastering and the pressing plant matter far more.
- โColoured vinyl sounds worse.โ Older coloured pressings could be a little noisier than black, but a good modern one is hard to tell apart. Buy the colour you like.
- Picture discs are the exception. The image is printed on paper or film sealed under thin clear vinyl, and theyโre usually noticeably noisier. Lovely to display, less lovely to play.
- โRemastered from digitalโ means itโs fake. Most new records are cut from digital masters, and many great-sounding ones are. A good master matters; whether it passed through a computer mostly doesnโt.
Treat Your Records Right
- Handle records by the edges and the label. Fingerprints hold dust and grime in the groove.
- Store them upright, like books, away from sunlight and heat. Stacking them flat is how records warp.
- Use inner sleeves. The paper ones many records ship in shed fibres and scuff; anti-static poly-lined sleeves are cheap.
- Brush before each play with a carbon-fibre brush. For grime a brush canโt shift, a record-cleaning fluid does wonders.
- Keep the stylus clean with a small stylus brush, always brushing back to front, never side to side.
- Close the dust cover when youโre not playing.
- Mind the Malaysian heat and humidity. A record left in a hot car for an afternoon can warp for good, and so can one that sat too long in a delivery van, so check online orders as soon as they arrive. Damp rooms grow mould on sleeves; keep the collection somewhere aired or air-conditioned, and a few silica gel packs on the shelf help.
Find Your Turntable
Not quite sure where to start? These five quick questions should help narrow things down. At the end, youโll have a better idea of what kind of turntable might suit you, how everything comes together, and the additional costs worth keeping in mind.
Iโve also listed the possible outcomes below, in case youโre curious about the other setups. Feel free to share your result with a friend too.
1 of 5
Whatโs your budget for the turntable itself?
Every possible outcome
My Two Cents
If the budget is tight, the Audio-Technica AT-LP60XBT with a pair of powered bookshelf speakers is the classic starting point, and for good reason. Itโs cheap, fully automatic, has a built-in preamp and Bluetooth, and the stylus is easy to replace.
Just go in knowing the trade-off. Its arm is fixed, with the stylus set at a fairly heavy 3.5 grams7, and the cartridge canโt be upgraded. Most records will play happily. If one doesnโt, unfortunately you canโt adjust your way out of it, which is exactly what happened to me with its bigger sibling.
If you can stretch to around RM1,500, Iโd skip straight to a turntable with an adjustable arm, like the AT-LP5X I use now. Youโll only pay once.
Want the adjustable arm and the press-a-button convenience? The AT-LP3XBT is the cheapest Audio-Technica turntable you can buy new here with an adjustable counterweight and anti-skate, at around RM1,300โ1,550. Itโs still fully automatic, with a built-in preamp, Bluetooth and the same AT-VM95C cartridge my LP70XBT had, but the arm lets you add force when a heavy pressing needs it, and the cartridge can be upgraded later.
Either way, donโt spend the whole budget on the turntable. Powered bookshelf speakers are the easiest pairing: plug the turntable into them (preamp switch on LINE) and youโre done. My own LP5X goes through its built-in preamp straight into a pair of Edifier R1855DB powered speakers.
Living somewhere speakers arenโt an option? Headphones work too. A turntable canโt drive them on its own, but a phono preamp or amplifier with a headphone jack can, and Bluetooth turntables pair with wireless ones (with a small hit to the sound).
Glossary
By this point, you should already be familiar with this jargon:
- LP / EP / single: a full album, a short release (around 4โ6 tracks), and one or two songs.
- RPM: how fast the record spins, 33โ , 45 or 78.
- Lead-in / locked groove: the silent spiral at the edge that draws the stylus into track 1, and the closed loop at the end that keeps it from running into the label.
- Phono / line level: the cartridgeโs tiny signal vs the normal signal everything else uses.
- Preamp: the box (or circuit) that turns phono into line level.
- Powered / passive speakers: with an amp built in, or needing a separate one.
- Stylus / needle: the diamond tip that rides the groove. Same thing, two names.
- MM / MC: moving magnet and moving coil, two kinds of cartridge.
- Headshell: the piece at the end of the tonearm that holds the cartridge. On some turntables it unscrews, making a cartridge swap easier.
- Counterweight: the weight at the back of the tonearm that sets the tracking force.
- Tracking force: how hard the stylus presses into the groove, in grams.
- Anti-skate: a small outward force that balances the armโs pull towards the middle.
- Wow and flutter: wobbles in speed you hear as wobbles in pitch. Lower is better.
- Pressing: one manufacturing run of a record. Pressings vary in quality, which is why collectors argue about them.
- Heavy (180g) pressing: a record pressed from more vinyl than the usual 120โ140g. Thicker and stiffer, often louder, and sometimes harder for a fixed tonearm to track.
- Grade (M, NM, VG+โฆ): how worn a used record or sleeve is, on the Goldmine scale.
- Play-graded: graded by actually listening to the record, not just looking at it.
Final Thoughts
Getting into vinyl can be an expensive rabbit hole, and thereโs certainly no shortage of people willing to convince you that you need a more expensive turntable, a better cartridge or a different set of speakers.
My advice? Start simple. Get a decent setup, find some records you actually enjoy listening to, and learn to appreciate the little ritual of putting one on.
You can worry about the upgrades later. Trust me, thereโll be plenty of time (and money) for that.
And if youโd like to see what Iโve been spinning, I post my records on TikTok as @theraycords:
References
Most of this guide stands on the shoulders of these, which are all worth a read:
- A Beginnerโs Guide to Turntables and Vinyl, Long Play Vinyl
- Beginnerโs Guide to Turntables, Turntable Lab
- A Beginner Guide to Turntables, Swee Lee
- Beginnerโs Guide to Turntable Setup, Absolute Sound
- Turntable guides, r/turntables
- For Beginners: Four Reasons Why You Should Get into Vinyl, Matt Bonaccio, SoundStage! Hi-Fi
- Why do I buy vinyl records?, Tim Moore, Lee Clarion
- Vinyl Records and Nostalgia: The Appeal of Analog Music, Sophia Omarji, Illumination
Thereโs a second job hiding in the preamp. When a record is cut, the bass is turned down and the treble turned up, so the grooves fit and surface noise ends up quieter. The preamp applies the exact opposite curve, called RIAA equalisation. Thatโs why turning up the volume on an AUX input isnโt a substitute: the music comes out tinny as well as quiet.
Thatโs the figure for the ATN3600LC, the conical replacement stylus for the AT-LP60X series. Better styli and gentler setups last longer, but a few hundred hours is a sensible point to start listening for wear.
From Audio-Technicaโs guide to stylus types. The hours are its rated lifespans, from the AT-VMN95SH page; it doesnโt give one for special line contact. Real life depends on setup, cleanliness and how worn your records are.
From Audio-Technicaโs AT-VM95E specifications: 1.8 to 2.2 g, with 2.0 g as standard.
Audio-Technicaโs VM95 styli all fit the same VM95 cartridge body, per its AT-VMN95SP page.
From Discogsโ grading guide, which uses the Goldmine Standard. Its prices are โgenerallyโ figures relative to Near Mint: about 50% for VG+, 25% for VG, 10โ15% for G and 0โ5% for Fair or Poor.
Audio-Technica notes that the ATN3600L stylus has a 3.5 g down-force, which is why other styli canโt simply be swapped onto these turntables. Heavier tracking keeps a simple conical stylus in the groove, at the cost of some extra wear.
